-100%

AEG UPS Protect C 10kVA/10kW, VFI, On-line double conversion, floor standing, automatic bypass, RS232 interface


– Thanks to genuine VFI technology (online / double conversion), Protect C is suitable for all critical business applications
– The proven VFI topology of Protect C protects against all network problems
– A sinus-shaped power feed is achieved under all load conditions at the input
– Highly integrated switches and a robust IGBT module reduce the number of electrical connections and components and therefore provide for increased reliability
– A Static Bypass Switch (SBS) ensures additional safety in case of overload

MAXIMUM CONTROL
– The bar displays for UPS load and battery capacity, as well as the clear pictogram of the system components provide information on the essential operating conditions
– Data is transmitted through an RS232 interface
– With an optional SNMP (PRO) adapter, remote monitoring via a web browser and multiserver shutdown are possible
– The special AEG PS shutdown software “CompuWatch” is included

SWITCHABLE IN PARALLEL
– Protect C 6000 and C 10000 offer the possibility of parallel operation
– Both active redundancy and higher availability are achieved with higher power requirements being taken into account

Features
– VFI topology (online / double conversion) protects against all network problems
– Micro processor control/ digital signal processors for maximum availability
– Sinus-shaped power feed (high-frequency pulse width modulation with IGBTs)
– n+x technology for redundancy and performance increase
– Extension slot for SNMP, potential-free contacts, remote panel
– Also available as S-version with higher capacity charging rectifier for longer autonomy times
– Space saving design with integrated battery system
– Integrated fault operation security for manual bypass switch

Specifications
– Power type rating: 6000VA / 6000W
* Parallel connection

UPS INPUT
– Input voltage: 208 VAC / 220VAC / 230VAC / 240VAC
– Voltage range: 110 – 275VAC
– Frequency (auto selection): 45-55Hz / 54-66Hz (extendable to 40-70Hz when load < 60%) - Input power factor/(THDi): >0.98 (< 3 %) - Current consumption at nominal load (max.): 50 A UPS OUTPUT - Rated output voltage (adjustable): 208 VAC / 220VAC / 230VAC (default) / 240VAC - Frequency in battery mode: 50Hz / 60Hz +/-0.1% - Output current (at 230VAC): 43.4 A - Transfer time at mains outage: 0ms (without interruption) - Voltage waveform: Pure sine wave - Overload response (online operation): <125% for 10min. / 125% - 150% for 30s / > 150% for 500 ms
* Subsequent, transfer to bypass mode
– Crest factor: 3:1
– Short circuit response: Short circuit proof (3× IN for 200ms)

BATTERY
– Type: Sealed, maintenance free, integrated (proprietary brand)
– Rated voltage (linked): 240VDC
– Overload / deep discharge protection: Yes

COMMUNICATION
– Interfaces: RS232, USB, communications slot for SNMP, potential free relay contact
– Shutdown software: CompuWatch incl. 5 network licenses for all common OS (e.g. Windows, Linux, Mac)
– Failure indicators (acoustic / visual):
* LED display for UPS summary / battery capacity display, status display
* Indicators for mains failure, overload, battery charging, battery replacement, failure

GENERAL DATA
– Efficiency in ECO+ mode: >98%
– Efficiency at nominal load (double conversion mode): >95%
– Audible noise (1m distance): <55 dB(A) - Operating temperature range: 0°C to 40°C - Humidity: 0% - 95% (without condensation) - Operation altitude: * Up to 1000 m at nominal load * 1000-3000m the power derating is 1 % every 100 m according to 62040- 3 - EMC conformity: EN 62040-2 Class C3 - Product safety: EN 62040-1 - Mains input: Secured terminal block - Consumer outputs: Secured terminal block - Dimensions approx. (W×H×D): * UPS: 225×589×452 mm * Battery: 225×589×452 mm - Weight approx. UPS: 71 kg - Weight approx. battery: 115 kg - Conformity: CE

24,00kn 76.710,00kn

– Thanks to genuine VFI technology (online / double conversion), Protect C is suitable for all critical business applications
– The proven VFI topology of Protect C protects against all network problems
– A sinus-shaped power feed is achieved under all load conditions at the input
– Highly integrated switches and a robust IGBT module reduce the number of electrical connections and components and therefore provide for increased reliability
– A Static Bypass Switch (SBS) ensures additional safety in case of overload

MAXIMUM CONTROL
– The bar displays for UPS load and battery capacity, as well as the clear pictogram of the system components provide information on the essential operating conditions
– Data is transmitted through an RS232 interface
– With an optional SNMP (PRO) adapter, remote monitoring via a web browser and multiserver shutdown are possible
– The special AEG PS shutdown software “CompuWatch” is included

SWITCHABLE IN PARALLEL
– Protect C 6000 and C 10000 offer the possibility of parallel operation
– Both active redundancy and higher availability are achieved with higher power requirements being taken into account

Features
– VFI topology (online / double conversion) protects against all network problems
– Micro processor control/ digital signal processors for maximum availability
– Sinus-shaped power feed (high-frequency pulse width modulation with IGBTs)
– n+x technology for redundancy and performance increase
– Extension slot for SNMP, potential-free contacts, remote panel
– Also available as S-version with higher capacity charging rectifier for longer autonomy times
– Space saving design with integrated battery system
– Integrated fault operation security for manual bypass switch

Specifications
– Power type rating: 6000VA / 6000W
* Parallel connection

UPS INPUT
– Input voltage: 208 VAC / 220VAC / 230VAC / 240VAC
– Voltage range: 110 – 275VAC
– Frequency (auto selection): 45-55Hz / 54-66Hz (extendable to 40-70Hz when load < 60%) - Input power factor/(THDi): >0.98 (< 3 %) - Current consumption at nominal load (max.): 50 A UPS OUTPUT - Rated output voltage (adjustable): 208 VAC / 220VAC / 230VAC (default) / 240VAC - Frequency in battery mode: 50Hz / 60Hz +/-0.1% - Output current (at 230VAC): 43.4 A - Transfer time at mains outage: 0ms (without interruption) - Voltage waveform: Pure sine wave - Overload response (online operation): <125% for 10min. / 125% - 150% for 30s / > 150% for 500 ms
* Subsequent, transfer to bypass mode
– Crest factor: 3:1
– Short circuit response: Short circuit proof (3× IN for 200ms)

BATTERY
– Type: Sealed, maintenance free, integrated (proprietary brand)
– Rated voltage (linked): 240VDC
– Overload / deep discharge protection: Yes

COMMUNICATION
– Interfaces: RS232, USB, communications slot for SNMP, potential free relay contact
– Shutdown software: CompuWatch incl. 5 network licenses for all common OS (e.g. Windows, Linux, Mac)
– Failure indicators (acoustic / visual):
* LED display for UPS summary / battery capacity display, status display
* Indicators for mains failure, overload, battery charging, battery replacement, failure

GENERAL DATA
– Efficiency in ECO+ mode: >98%
– Efficiency at nominal load (double conversion mode): >95%
– Audible noise (1m distance): <55 dB(A) - Operating temperature range: 0°C to 40°C - Humidity: 0% - 95% (without condensation) - Operation altitude: * Up to 1000 m at nominal load * 1000-3000m the power derating is 1 % every 100 m according to 62040- 3 - EMC conformity: EN 62040-2 Class C3 - Product safety: EN 62040-1 - Mains input: Secured terminal block - Consumer outputs: Secured terminal block - Dimensions approx. (W×H×D): * UPS: 225×589×452 mm * Battery: 225×589×452 mm - Weight approx. UPS: 71 kg - Weight approx. battery: 115 kg - Conformity: CE

SKU: 51985

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AEG UPS Protect C 10kVA/10kW, VFI, On-line double conversion, floor standing, automatic bypass, RS232 interface”

There are no reviews yet.